Click image to view full size image
Description:
This series full automatic blowing machine,production capacity : 3200-3600 b/h
it can produce water bottle, drug bottle etc
Technique Parameter of blow molding machine:
Main part: | ||
Pneumatic part | Valve | SMC |
Cylinder | ||
Electric part | PLC | LG Mitsubishi |
Operating system | LG /HITECH | |
Relay | OMRON | |
Infrared thermometer | America raytek | |
Note | All of the electrical components adopts CEULCCCapproved international advanced high-tech product. | |
Main parameter: | ||
Model | CM-A4 | |
Productivity | Depend on bottle design | 3200-3600PCS/H |
Product type | Body diameter | 20mm-100mm |
Height | 50mm-350mm | |
Neck diameter | 15mm-38mm | |
Mold | Cavity | 4cavities |
Mold thick | 240mm | |
Mold | 500*500mm | |
Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
Rated Power | 49kw | |
Really use power | 14kw | |
Air source | LP air compressor | 1.6m3/min 1.0MPa 1set (15KW) |
HP air compressor | 1.0 m3/min 3.0MPa 2sets (each set 11KW) | |
Air dryer | 2.0m3/min 3.0MPa 1set | |
Cooling water | Cooling water | 15L/min |
Size | L*W*H | 1908*1858*1920mm |
Weight | 3600kg | |
Auxiliary equipmentpreform unscrambler | L*W*H | 276*106*186mm |
Weight | 250kg | |
Resin available |
| PET |
CM-A4 Full automatic bottle blowing machine
